Do you charge more for a callout at night, on weekends or on public holidays?

Our after-hours rate applies any time outside standard business hours, whether that's a Tuesday at midnight or a Sunday public holiday, since an electrical emergency doesn't check a calendar before it happens. We'll confirm that rate with you on the phone before we dispatch a truck, so there's no surprise on the invoice once the job's done.

What Central Coast suburbs do you cover?

Our core coverage runs from Gosford, Erina and Terrigal through to Tuggerah, Wyong and Toukley, with a 1 hour average response time across that area. We also reach outlying and hinterland addresses further from the coast, though arrival there can stretch to around 90 minutes depending on traffic and time of day.

What should I do while I wait for the electrician to arrive?

If it's safe to do so, turn off the main switch at your switchboard, keep everyone and any pets clear of the affected area, and stay well away from water near anything electrical. If wires are down or exposed, keep your distance entirely. We'll talk you through these steps over the phone the moment you call.

Can you repair storm or weather damage to my switchboard or power lines?

Yes, storm and weather damage is one of our most common callouts on the Central Coast, from fallen lines to water ingress in switchboards after heavy rain. Where the damage affects your service mains, the connection between the street supply and your meter, that work legally requires a Level 2 Accredited Service Provider, which is exactly what we're accredited to do.

Will I get anything in writing after an emergency repair?

Yes, every completed job comes with a Certificate of Compliance for Electrical Work, which you'll want on file for insurance and for resale down the track. On top of that, the repair itself is backed by our lifetime labour guarantee, in writing, so you've got proof of the work and proof it's covered.

Commercial Electrician Central Coast

Eagle Service Solutions covers the full scope of commercial electrical work a Central Coast business needs from a single contractor. Here's what falls under our commercial electrician services:

Three-phase power and switchboard upgrades for offices, retail stores and industrial sites
Office, retail and industrial electrical fit-outs, from cable runs to final commissioning
Emergency lighting and exit sign installation, testing and compliance
Data and communications cabling for workplaces of any size
UPS systems and backup generators for critical circuits
RCD testing, thermal imaging and scheduled electrical safety inspections
Test-and-tag programs for portable appliances
Certificate of Compliance for Electrical Work (CCEW) preparation and eCert lodgement
Power factor correction and industrial motor control installation
24/7 emergency call-out response across the Central Coast

Service	Estimated Cost (incl. GST)	What's typically involved
Commercial hourly rate (standard hours)	$140 – $200+ per hour	Our standard labour rate for general commercial electrical work.
Commercial call-out fee	$120 – $200+	Getting a licensed commercial electrician to your site.
Switchboard upgrade (commercial premises)	$2,000 – $5,000+	Upgrading a commercial switchboard to handle load and meet current safety standards.
LED lighting upgrade (office or retail)	$2,500 – $8,000+	Supplying and installing energy-efficient LED lighting across an office or retail fitout.
Three-phase power installation	$4,000 – $8,000+	Installing three-phase power for equipment or machinery that needs it.
Data cabling and network installation	$80 – $150+ per point	Running and terminating data/network cabling for each connection point.
Emergency and exit lighting (supply and install)	$250 – $450+ per unit	Fitting compliant emergency and exit lighting required in most commercial premises.
Electrical safety audit and compliance report	$500 – $1,200+	A full audit of your electrical system with a written compliance report.
RCD and safety switch installation (commercial)	$250 – $450+ per unit	Installing safety switches across commercial circuits.
Surge protection installation	$350 – $700+	Protecting your electrical system and equipment from voltage spikes.
Power factor correction	$2,500 – $6,000+	Improving the efficiency of your power supply for larger commercial or industrial sites.

Commercial electrical work covers any non-residential premises: retail stores, office buildings, restaurants, warehouses, hospitals and factories. These systems carry higher loads, need more protective devices and sit under stricter regulatory obligations than a house does. Where a residential job might involve a single-phase switchboard with a handful of circuits, a commercial space we work on typically needs three-phase power, RCD protection on non-domestic final sub-circuits, emergency and exit lighting, and fire detection power supplies, all built to AS/NZS 3000:2018 specifications.

If you're wondering why your business needs a specialised commercial electrician rather than a general tradesperson, the answer comes down to consequences. A wiring fault in a home is an inconvenience. A wiring fault in your business is measured in lost revenue, safety incidents and insurance disputes. Eagle Service Solutions exists because Central Coast businesses need a commercial electrician who understands that difference and works to the standard it demands, every time, on every job.

New commercial electrical installations are one of the core services Eagle Service Solutions provides across the Central Coast. Our scope covers main service infrastructure such as switchboards, transformers and three-phase distribution, alongside LED lighting systems, data and communications cabling, HVAC power supplies, UPS and backup power, and fire detection circuits. As your commercial electrician, we handle the complete installation, from the first cable run through to final switchboard commissioning and sign-off.

Every installation we carry out meets AS/NZS 3000:2018 for wiring, AS/NZS 3008 for cable sizing and voltage drop, and AS/NZS 61439 for switchboard construction. A Certificate of Compliance for Electrical Work is required for every commercial project in NSW, and since 1 July 2026 these certificates must be lodged through BCNSW eCert; handwritten or PDF forms are no longer accepted. We manage that lodgement for you as part of the job, not as an afterthought once the work is finished.

Ongoing maintenance is what keeps your electrical systems safe, compliant and operational, and it's a service Eagle Service Solutions runs on a scheduled basis for Central Coast businesses. Our maintenance programs cover regular safety inspections, RCD testing, thermal imaging of switchboards to detect hot spots before they become faults, emergency lighting verification and test-and-tag for portable appliances. Businesses that skip scheduled maintenance tend to discover faults during trading hours, which is exactly when the cost of downtime is highest.

If you've ever wondered how much a single electrical fault can cost your business, consider that one switchboard fault or tripping RCD can shut a trading site for half a day, costing thousands in lost sales and spoilage. That's why our emergency call-out service is built for speed. Our team responds to burnt smells from switchboards, flickering lights, repeated circuit trips and overheating panels, and because we're a local commercial electrician on the Central Coast, we're not travelling in from out of the region when your business needs us fastest.

Eagle Service Solutions structures its commercial electrical services around three categories: office and retail, industrial, and safety and compliance. Each category demands different equipment, different standards of knowledge and different scheduling, and our team is set up to move between all three without compromising on any of them.

For office environments, we install workstation power, structured data cabling, lighting control systems such as dimming and occupancy sensors, and backup power for servers, designed for daily use by dozens or hundreds of staff. Retail stores bring their own requirements on top of that. If you're running a retail fit-out and wondering what's involved, here's what a commercial electrician typically needs to deliver for your space:

Display and accent lighting with a high colour rendering index so merchandise looks accurate under the lights
Storefront and signage lighting that meets local council and NCC standards
Dedicated circuits for point-of-sale systems, refrigeration units and security systems
After-hours scheduling so electrical work never disrupts your trading day

Industrial facilities operate on a different scale again. Three-phase power feeds motors, compressors, large HVAC units and manufacturing equipment, and our industrial electrical work covers motor starters, control panels, variable speed drives, isolation systems and earthing. Switchboards in industrial settings carry higher fault current ratings and need more frequent safety inspections than an office or retail board. We also handle power factor correction, which reduces your energy costs by improving the efficiency of power delivery to inductive loads like motors and transformers, and our electricians carry the Level 2 certification required for work on service lines and metering equipment.

On the safety and compliance side, commercial electricians must adhere to the Australian/New Zealand Wiring Rules under AS/NZS 3000. Eagle Service Solutions performs electrical safety inspections, compliance testing, emergency lighting checks and RCD verification, and we supply compliance documentation and test reports for every job we complete, so you have the paperwork ready before an audit lands on your desk.

Eagle Service Solutions follows a four-step process for every commercial project on the Central Coast, and this structure is what keeps timelines predictable, costs transparent and compliance built in from the start rather than patched in at the end. If you're asking what actually happens between your enquiry and the work being switched on, here's how we move through it:

Site assessment and load calculations: we measure your existing electrical infrastructure, including main switchboard, sub-boards and available capacity, and calculate maximum demand using the diversity factors set out in AS/NZS 3000, so we know whether your current supply can handle the intended use
Design review and compliance checking: we plan wiring layouts, size cables for voltage-drop compliance under AS/NZS 3008, select protective devices rated to actual fault currents, design the earthing system and set lighting levels per AS/NZS 1680
Timeline and cost estimation: we provide a detailed written quote breaking down labour, materials and timelines, specifying switchgear brands, fixture types, cable quantities and labour hours, with no hidden surprises on the invoice
Approval and scheduling: we confirm council or building approvals, verify our NSW Fair Trading licensing on the job, and schedule the work around your business, including after-hours or weekend access for trading sites

We offer an obligation-free quote before any commitment, so you know exactly what a project involves before it starts.

Many Central Coast commercial buildings are still running old switchboards with fuse systems, undersized conductors or no RCD protection, and these outdated setups present a genuine fire risk, fail compliance inspections and can trigger insurance refusal. As your commercial electrician, Eagle Service Solutions upgrades switchboards to AS/NZS 61439 assemblies, replaces outdated wiring, installs RCDs on all required circuits, and increases capacity for modern loads. If your business is expanding, whether that means adding server racks, refrigeration or EV charging, it's common to discover your existing mains can't handle the new demand. We assess available capacity during the site survey and specify mains upgrades or additional sub-boards before the problem turns into an urgent repair.

Power outages cost real money. Even a short outage during trading hours means lost sales, spoilage and reputational damage, which is why Eagle Service Solutions installs UPS systems and backup generators for critical circuits, and runs thermal imaging during scheduled maintenance to detect overheating components before they fail. For businesses where any interruption is unacceptable, we design redundancy into critical circuits and provide a rapid fault-finding response when something does go wrong.

Non-compliance is the other risk that catches businesses out. Insurance audits, council inspections and landlord reviews can uncover missing test-and-tag records, untested emergency lighting, absent certificates or work carried out by unlicensed operators, and the consequences range from fines to uninsurability. Eagle Service Solutions runs routine compliance audits, lodges Certificates of Compliance via eCert as required since 1 July 2026, and keeps detailed records of every inspection and test we perform, so your business has a clean compliance history whenever it's needed.

Commercial electrical work on the Central Coast is installed to AS/NZS 3000 as it applies to offices, retail and hospitality premises, with additional load, distribution board and emergency lighting provisions that residential circuits do not carry. As a person conducting a business or undertaking (PCBU), a commercial tenant or landlord carries duties under the Work Health and Safety Regulation 2017 (NSW) to manage electrical risk, which is where in service inspection and testing of leads, RCDs and portable appliances to AS/NZS 3760 becomes a scheduled compliance task rather than a one off job.

Every fitout circuit, switchboard alteration or new distribution board is certified with a Certificate of Compliance for Electrical Work lodged with Building Commission NSW under the Home Building Act 1989 licensing framework, giving building owners and tenants a paper trail that satisfies both insurers and WHS auditors.

Eagle Service Solutions is a licensed commercial electrician built around compliance, not shortcuts. We hold the NSW electrical licensing and Public Liability Insurance required for commercial and industrial projects, and we lodge every Certificate of Compliance for Electrical Work through eCert rather than leaving paperwork to chance. Every quote is written and fixed before work starts, every job comes with compliance documentation and test reports attached, and our team answers emergency call-outs across the Central Coast around the clock.

Eagle Service Solutions delivers tailored electrical solutions for commercial and industrial properties across the Central Coast, and we handle the full scope of the work, from new installations and fit-outs through to ongoing maintenance, compliance testing and emergency response. Commercial buildings account for roughly 25 percent of Australia's total electricity consumption, according to the DCCEEW Commercial Buildings Baseline Study, and with energy costs rising and compliance requirements tightening, including the eCert mandate for all NSW electrical certificates since July 2026, a reliable commercial electrician isn't optional for any business serious about its operations.

Here's how to get started with Eagle Service Solutions:

Call us for a fixed quote and tell us what your business needs; we provide an obligation-free quote.
Book a site assessment so we can evaluate your existing systems and calculate what your project actually requires
Receive a detailed written quote with labour, materials, timeline and compliance steps laid out clearly

"They responded very quickly and did my job that day. The workman was very polite and friendly and did an excellent job."

"Jarrod was very professional, provided options and answered questions."

"Dale was great. He turned up on time, very friendly and completely professional. Would definitely use again!"

"Eagle Service Solutions have great communication, showed up on time, the team were friendly, helpful and the job was neat, clean and tidy... this is the second time I have used them and can't fault their work."

"Colin arrived on time, was friendly, knowledgeable and efficient. Highly recommend."

"Josh, Tyson and Col were wonderful, we had a range hood ducted through the roof, the level of work was excellent, would recommend and definitely reuse."

"Dylan, Will and Doug were thorough and clearly communicated with me about the work being done. Great communication with head office."

"Josh has great customer service skills... he organised a plumber Doug to come to my house and investigate a water issue... Doug and his team dug trenches and worked out how to capture the water before it went under my house."

"Dylan did a fantastic job repairing and replacing a damaged section of our sewer line... he kept us informed throughout the job and delivered a high-quality result while leaving everything clean and tidy."

"I recently used Eagle Service Solutions to upgrade my old gas storage hot water system to a continuous flow system. The team were prompt and professional, and the installation was completed quickly. I'm very happy with the result."

"Huge thank you to Dale... who came to our house on short notice to attend to our leaking shower. Dale was efficient, professional and polite, and took the time to explain the issues to us."

"I had a hot water system installed by Angelina and Braydon this morning, excellent service, they were punctual and very friendly."

"Super happy to have Ben as our tradie today. His attention to detail, expertise and professionalism is certainly appreciated. Top job Ben!"

"THE BEST! For customer service, for high quality workmanship and for price. I've been on the coast for 40 years and wish I'd found these guys sooner. I've used them 3 times now and they have been fantastic, the whole team are very professional."

"Absolutely fantastic."